.
"I just love my Trail Corral. I'm a barrel
racer and I feel a lot better now knowing my
horses are relaxed and not tied to a trailer
or in a strange stall. It really makes a
difference in their performance. I also have
to say that now when we go for trail rides in
the mountains, My Trail Corral is the perfect
place for them to relax after a long ride.
Also I like the fact that they are just outside
the trailer where I can see them. Thanks
guys."
- Lynnie Espinoza, Charleston, UT
|
"It is a fantastic product (It helps me
sleep before any race as I am
comfortable that my horses are safe.) ...
Niles Mecham built my corral in 1998, I
use it all the time, my trailer doesn't
have a scratch on it and I have had no
problems with my horses laying down in
it, it is just a fantastic product!"
- Beverly Gray, U.S. Equestrian
Team Endurance Rider
|
Step 4
Unfold the other panels. You're now ready
to remove the pins and drop the 3rd rail
(slide rail) into place.
|
Step 3
Simply swing the remaining panels into
place and adjust/set the legs. You can
do it yourself with a smile!
|
Step 2
Swing the 1st panel. Sturdy mounting
brackets and hinges do the lifting and
adjustable legs do the rest
|
Step 1
Pull one pin and the Trail Corral
is ready to assemble.
|
|
 |
Here are a few key points:
- The First Trail Corral was made 11 years ago for Beverly Grey a Olympic
Endurance Rider who still uses hers today
- We believe Trail Corral to be Superior in Quality and Safety compared to what is
on the market today
- We use Industrial Grade Powder Coating for a durable Rust Free finish
- Trail Corral has Adjustable Legs to accommodate for All types of Terrain
- We have 10x10 and 12x12 corrals but additional panels may be purchased to
create Larger Corrals with or without dividers (we can make custom sizes)
- Height: 21" over the fender, 38" in height
- You can Assemble Trail Corral by Yourself. It was designed to be a one person
operation
- Weight: 120lbs but the hinges to the work for you (watch the video)
- Shipping: 4 to 6 weeks
- Warranty: 1yr on welds and material
Frequently Asked Questions:
1.) I have 2 horses, will they both fit in one Corral?
If you have two horses that get along well, then the answer is "Yes". If your horses don't
get along, the answer is probably "No". Additional panels can be purchased to enable
you to create a larger enclosure with or without a center divider. If you have a 12' wall
on both sides of your trailer, then you could simply mount a second Trail Corral™ on the
other side. Trail Corral™ can build custom sizes just for you! Fill out our contact form
and we will work closely with you to design a product unique to your trailer.
2.) Can I assemble it by myself?
"Yes!" The Trail Corral™ was designed to be a "one-person" operation, with the sturdy
mounting brackets and a reinforced hinge system, there is no need to worry about lifting
any significant weight. Trail Corral™ practically sets itself up!
3.) How do I mount it to my trailer?
The Trail Corral™ is very simple to install. Simply find 2 of your trailer studs or "Ribs" that
are 12 feet apart. Determine the height you want and then measure and drill the
mounting holes. Note: not all trailers are built alike. Please study your trailer and
determine the best place to mount the Trail Corral™ on your trailer. If you have trouble,
we can recommend a local dealer to assist you, or you can call our technician
at 336-783-7061.
4.) How heavy is the Trail Corral™?
Trail Corral™ is approximately 120 lbs. Once installed on the trailer, the hinges do most
of the work for you. Placing the Corral back into it's hanger only takes a small amount of
effort.
5.) How do I get a Trail Corral™?
You can order the Trail Corral™ by calling (336) 710-7579 or you can order online by
clicking here. We accept PayPal, checks, and money orders for the exact amount. We
can ship the Trail Corral™ to anywhere in the continental United States.
Please allow 4-6 weeks for shipping.
6.) Can you give me ideas on where to mount my Trail Corral™?
"Yes!" The Corral system can be mounted on either side of the trailer or at the rear.
Note: When determining the placement of the Corral, you must determine where you
want the "GATE", which is the single panel. With your back against your trailer... Which
side does the gate need to be on, the right or the left? This will determine what you
ORDER.
7.) How are the panels painted?
The panels are painted with a durable powder coating, available in various colors.
8.) Is there a warranty on the Trail Corral™?
We offer a ONE YEAR LIMITED WARRANTY on the workmanship i.e. welds and
materials. Trail Corral™ is not responsible for damage caused during the mounting
process or due to unruly horses or their humans.
|
 
Trail Corral, Portable Corral Mounting Information
To make things simple, just send us a digital photo of you horse trailer. We will then be able
to walk you through getting your trailer fitted for our portable corral system.
Send your photos to support@ljtrailcorral.com
The system is easy to install with only 10 bolts. It works with steel and aluminum trailers. The
system bolts to the vertical braces in your trailer walls using a through-bolt method with a
backer plate. This provides for maximum mounting strength and rigidity.
When choosing a mounting location for your portable corral system, please keep in mind
that the system mounts tight to the trailer. You should identify any ladders, mounting
brackets, hinges or lights that may be in the way. We can typically work around nearly any
obstacle. The system should not be mounted near the awning.
If finding braces that meet the requirements becomes a problem, spanner braces can be
ordered and easily installed.
|
|
